Advertising EPG/BD on IPN

[saurav.khanna]

I have a Multi-POD setup with a server attached to leaf 101 (POD-1) and another server attached to leaf 202 (POD-2). Both of the servers are attached in same EPG. I have created a BD and assigned it an IP address which is of the same pool as the two servers. I would like these servers to be available on internet via my IPN routers. So, the question is how do I advertise this subnet on IPN routers.

[richmond]

You need to create a Layer 3 Out to advertise BD subnets out of the fabric. This could be via GOLF or regular L3 Out. For a regular L3 Out you’ll need physical connections from your leaves to the IPN or intermediate devices. 

[saurav.khanna]

How do I do this via Golf. I don't have any of my leaf interfaces connected to IPN routers. EPG 410 deployed is pointed to BD 410 and that belongs to a VRF A (standard deployment). How do I make servers connected to those EPG's available on IPN's in the VRF A. 

VRF A is already pushed to IPN's via Golf Opflex.

[richmond]

Here is some documentation for it. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/L3_config/b_Cisco_APIC_Layer_3_Configuration_Guide/b_Cisco_APIC_Layer_3_Configuration_Guide_chapter_010010.html

[saurav.khanna]

How do I do this via Golf. I don't have any of my leaf interfaces connected to IPN routers. EPG 410 deployed is pointed to BD 410 and that belongs to a VRF A (standard deployment). How do I make servers connected to those EPG's available on IPN's in the VRF A. 

VRF A is already pushed to IPN's via Golf Opflex.

[anoop verma]

please check. may be useful

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/basic-config/b_ACI_Config_Guide/b_ACI_Config_Guide_chapter_0110.pdf