All Spines and Leafs show inactive status

[m7mmd3bbas]

Hello all,

Yesterday we faced a strange issue when we were implementing the ACI solution.

All spines (2 spines) and leafs (16 leafs) appear on the APIC with inactive status!!! 

I googled this issue but found only one answer related to MIC (manufacturer installed certificate) which needs TAC intervention.

We still didn't activate the smartaccount to get their support so i hope someone can help us with great thanks in advance.

* Note 1: The other 2 APICs are not shown in the main APIC, too.

* Note 2: we reset all the devices (APICs, Spines, and Leafs) with acidiag touch clean & setup but the same issue appeared.

[m7mmd3bbas]

Any thoughts?

I am wondering if upgrading the APICs,Spines, and leafs may help! ... What do you think?

Should i check the compatibility matrix site? But they should come from cisco with compatible versions, shouldn't they?

[Pedroxh · Accepted solution]

This problem is a bug  related here

I recomend you pay the smartaccount for the TAC help this solve this problem because i dont see any workaround

[m7mmd3bbas]

Thanks a lot Pedroxh.

It is a SSL bug issue and must be fixed by TAC team as they have the root privilage to create a new certificate.

BR,

Mohamed