Re: APIC /bin folder 100% full and APP not installing

kvs1 · ‎07-06-2023

Not sure if the /bin full is causing the app not to install but I ran df -h to see the /bin folder is at 100%. How do I know which files to delete from here or can I do it in the GUI?

df-h

ls -lS /dev/vg_ifc0/boot

Robert Burns · ‎07-06-2023

1. Which version of ACI?

2. Which "the app" are you referring to?

3. Don't ever delete anything from the CLI. The ONLY files you should ever remove are firmware images that you might have uploaded at one time. You can monitor all the storage volumes from the UI:

Robert

kvs1 · ‎07-06-2023

Thanks Robert,

Ver 5.2(7g) path below. Any advice? I'm told reboots fix the issue but it comes back eventually. Is acidiag touch clean a common solution or are there less drastic methods?

Robert Burns · ‎07-06-2023

If a reload doesn't clean up the stale log files (should), I'd suggest you contact TAC so we can get into the APIC via root and take a look at which files are consuming that volume. You wont be able to access that part of the filesystem otherwise.

A clean reload would likely also fix, but that's a little drastic and not necessary IMO - especially if this in a prod controller.

Robert

kvs1 · ‎07-07-2023

Ok thanks, the reboot lasts a few weeks before filling up again. Can you show me where in the filesystem I can verify the state log files to ensure they clear? I've read the APIC CLI user guide but has little to nothing regarding the filesystem processes. Regardless, I opened a TAC case.

Robert Burns · ‎07-07-2023

You can only verify the partitions you have access to. Mainly from the UI is the best way to monitor these. Beyond that, you'd need root access (only available to TAC) to investigate further.

Robert

kvs1 · ‎07-07-2023

We're informed that there's a bug code for it and that it may or may not be fixed in the latest release.

Robert Burns · ‎07-07-2023

Can you provide the Bug ID - might be helpful to others.

Robert

KVS7 · ‎07-10-2023

I think it's a private site but it's supposedly fixed after version 5.2(7f) from what I saw shoulder surfing. This is most likely unrelated to apps not installing.