We've configured the VMM Domain, AEP and installed the AVE but it fails to obtain a TEP address even though everything appears to be configured correctly?
cisco-ave:~$ ip address show dev kni0
5: kni0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000
link/ether 00:50:56:a2:88:cd brd ff:ff:ff:ff:ff:ff
cisco-ave:~$ vemcmd show opflex
Status: 0 (Discovering)
Channel0: 0 (Discovering), Channel1: 0 (Discovering)
Dvs name:
Remote IP: Port:
Infra vlan: 3967
FTEP IP: 0.0.0.0
Switching Mode: unknown
Encap Type: unknown
NS GIPO: 0.0.0.0
ukx2leaf619# show vlan ext
VLAN Name Encap Ports
---- -------------------------------- ---------------- ------------------------
12 infra:default vxlan-16777209, Eth1/2, Po2
vlan-3967
We are trying to run on the Synergy HP platform and have already moved their reserved vlan as this was 3967.
Any help gratefully received?
Thanks
