08-23-2022 03:30 AM
Hi All ,
I'm trying to check SFP combability ( with below Cisco ACI models :
C9336C-FX-2 & 93180YC-EX.
Firmware version is : 14.2(4i)
SFP proposed models are : SFP-10G/25G-CSR-SR and / or SFP-25G-SR-S
i couldn't find them in the optics matrix sheet so checking if anybody tried that before .
08-23-2022 05:18 AM
check below links. all supported modules are listed on those links
C9336C-FX-2 - https://tmgmatrix.cisco.com/?npid=47
93180YC-EX - https://tmgmatrix.cisco.com/?npid=47&npid=43
select required SFP from list and table shows minimum and maximum OS releases supported
08-23-2022 05:38 AM
Hi Kasun ,
i already mentioned that i checked on the optics matrix website and couldn't find them there , sometimes the information there are not up to date , so i'm asking if anybody tried that on the ground .
Thanks
08-23-2022 06:04 AM
The SFP-10/25G-CSR-S is listed as supported on both platforms. The SFP-25G-SR-S is not. If its not listed, its not supported. TMG matrix is your SSOT.
Robert
08-23-2022 06:12 AM
you can count on matrix. if it is not there, best thing is to find alternative
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide