We want to migrate a ESXi server (multiple VM running on the server) from legacy network to ACI fabric. We want to achieve this by network centric approach. We don’t want to configure VMM domain. Below is the existing topology.
3560 Switch ---------ESXi server. Three links are in between server and switch. Below is the switch interface configuration.
-3560#sh run int Gi0/35
Building configuration...
Current configuration : 167 bytes
!
interface GigabitEthernet0/35
description *** Management port***
switchport access vlan 230
switchport mode access
spanning-tree portfast
end
-3560#sh run int Gi0/36
Building configuration...
Current configuration : 221 bytes
!
interface GigabitEthernet0/36
description ** xxxxxx **
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1-699,701-709,711-719,721-4094
switchport mode trunk
spanning-tree portfast trunk
end
-3560#sh run int Gi0/37
Building configuration...
Current configuration : 202 bytes
!
interface GigabitEthernet0/37
descripti ** xxxxxx **
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 700,710,720
switchport mode trunk
spanning-tree portfast trunk
end
Kindly suggest how to migrate to aci fabric.