Does anyone know how to clear the faults created by setting the CIMC addresses of the APIC's within the APIC GUI under Controllers>Controller Policies?
I've tried to under configure it and reboot, but fault still remains.
moquery -c faultInst -f 'fault.Inst.code=="F4101"'
Total Objects shown: 2
# fault.Inst
code : F4101
ack : no
alert : no
annotation :
cause : cimc-addr-set-failure
changeSet : lastRebootTime (Old: 2023-06-26T11:44:06.843+01:00, New: 2023-08-29T18:08:10.498+01:00)
childAction :
created : 2023-08-29T18:04:58.985+01:00
delegated : no
descr : On apic apic1 of fabric fabric1, Cimc address set failure. cimc-addr-set-failure.
dn : topology/pod-1/node-1/sys/fault-F4101
domain : access
extMngdBy : undefined
highestSeverity : minor
lastTransition : 2023-08-29T18:07:02.995+01:00
lc : raised
modTs : never
occur : 1
origSeverity : minor
prevSeverity : minor
rn : fault-F4101
rule : top-system-cimc-addr-set-failure
severity : minor
status :
subject : cimc-addr-set-failure
title :
type : config
uid :
userdom : all