having trouble install "aci-simulator-dk9.4.2.2e.iso" on cisco ucs 220 m3 , pls advise

[Ibrahim Jamil]

Hi Guys

having trouble install the below image on cisco ucs 220 m3 , pls advise

aci-simulator-dk9.4.2.2e.iso

[Claudia de Luna]

Hi @Ibrahim Jamil ,

Is this an actual ACI Simulator appliance you are working with?

Where in this process are you having problems?

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/simulator/install/b_APIC_Simulator_Installation_Guide/b_APIC_Simulator_Installation_Guide_chapter_0100.html#task_2F8E932F968744E9934490D817F2B5C1

[zulfikhar_a]

Hope you have seen this:
General Usage Guidelines
Observe the following guidelines when using this software release:
■ The Cisco ACI Simulator appliance software cannot be installed separately on a standard Cisco UCS C220 Server or on other servers. The software runs only on the Cisco ACI Simulator appliance server, which has the following PID:
— APIC-SIM-S2 (based on Cisco UCS C220 M4 server)
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/4-x/release-notes/Cisco-ACI-Simulator-Release-Notes-422.html