How to configure Backup of Fabric in Cisco ACI

[am00482701]

I am trying to take the backup of my ACI fabric to remote destination.

Steps what I am following:-

1)Admin>Import/Export>Export Policies>Configuration

right click create new config file put the Backup server policy under remote location and Start now>Submit.

But the file size is 1KB. Need procedure to push the entire conifg in the policy and then push it to remote location

[gkumark]

Hi,

you can probably check the status of backup export by expanding Configuration -> Click on your export policy -> In the right pane click on Operational. Maybe the export has some issues. Otherwise I don't think it can just be a 1KB file. Usually configuration export would have complete configuration and you don't need any other export. 

You can also refer to http://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/kb/b_KB_Using_Import_Export_to_Recover_Config_States.html#task_C1B7BF7971E14C36B6861D21B8D136DB for configuration steps.

Hope this helps.

Cheers

Ganesh