PBR Support L3OUT For Version 5.2

[ADC Lane]

Hi Team, 

Follow this document:

https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-739971.html

The docs introduce about PBR destination in L3Out using 2 Arm mode starting version 5.2, so i have a thinking that May I use PBR destination in L3out One arm mode, and L3out aslo is connection of EPGs from ACI fabric to outsite ? I attached brief topology as below.

It can be used to? Could you share some recommendations about  that ?

Thank you in advance !

[abhjha2 · Accepted solution]

Hi,

This is very well possible, However check other limitations, like no 0/0 subnet, if consumer or provider is an external epg it needs to be on a different leaf, etc.

-----------------------------------------
If you find my reply solved your question or issue, kindly click the 'Accept as Solution' button and vote it as helpful.

You can also learn more about Cisco ACI through our live Ask the Experts (ATXs) session. Check out the ATXs Resources [https://community.cisco.com/t5/data-center-and-cloud-knowledge/cisco-aci-ask-the-experts-resources/ta-p/4394491] to view the latest schedule for upcoming sessions, as well as the useful references, e.g. online guides, FAQs.
-----------------------------------------

[ADC Lane]

Hi @abhjha2 

Thank you so much for your time ! I am really glad because you attend to my question !