Question regarding Routing with two different L3 Outs / two FW Cluster

[Torsten_Graf]

Hello Community,

I have a question regarding routing with two l3 outs and two fw clusters.
as you can see we have a multi pod with a fw cluster in each pod (completely separate).

If VM B is trying to reach VM A (both in the same Datacenter, everything is working fine.
As soon as VM A is moved to the 2nd Datacenter, connection between VM A and VM B is not working anymore.
The way from VM B to VM A is still the same, but for the way back VM A is using the fw cluster in the 2nd DC as the default route is pointing towards this fw cluster.

Is there a way to get the VM A (when moved to 2nd DC) to use the L3Out in the 1st DC?

Best Regards
Torsten

[AshSe]

It's always good to prepares separate Physical and Logical Connectivity diagram to understand the query. Here I present your Logical Diagram. Please correct/Validate:

[AshSe]

....and I hope below is your Physical Connectivity diagram:

If this looks good, please feel free to present your requirement again.

[Torsten_Graf]

Hello AShSe.

thanks for your input. We have discussed with the customer and we will use inter VRF-Leaking as preferred solution.
We found a solution for the L3Out problem, but then we have some other problems.

[AshSe]

Hello @Torsten_Graf  feel free to table your problem here in this forum.