remote leaf cisco aci

[username11]

Is possible to configure a remote leaf with spine N9K-C9332C cisco aci ?

[Sergiu.Daniluk · Accepted solution]

Hi @username11 

Yes it is supported.

Here is the config guide: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/5-x/l3-configuration/cisco-apic-layer-3-networking-configuration-guide-50x/m_remote_leaf_switches_v2.html 

For the spine switch at the ACI Main Datacenter that is connected to the WAN router, the following spine switches are supported:

• Fixed spine switches Cisco Nexus 9000 series:

  • N9K-C9316D-GX

  • N9K-C9332C

  • N9K-C9364C

  • N9K-C9364C-GX

• For modular spine switches, only Cisco Nexus 9000 series switches with names that end in EX, and later (for example, N9K-X9732C-EX ) are supported.

• Older generation spine switches, such as the fixed spine switch N9K-C9336PQ or modular spine switches with the N9K-X9736PQ linecard are supported in the Main Datacenter, but only next generation spine switches are supported to connect to the WAN.

Take care,

Sergiu