08-01-2019 05:31 AM
Is it possible to add a new spine into the existing fabric even if the spine is not conected to all leaves? I know this is not a valid design but I'd like to know if this works. Is there a document which describes ACI behaviour when some cables are not connected between spine and leaves? For example when path from a source leaf to a target leaf must go over an another leaf (source leaf - spine1 - leafX - spine2 - target leaf) because of improper (faulty) cabling between source/target leaves and spines.
Solved! Go to Solution.
08-01-2019 07:29 AM
08-11-2019 04:28 PM
Hi @p.hruby ,
That is totally supported because that is basically the way a Stretched Fabric topology works:
Remi Astruc
08-01-2019 07:29 AM
08-11-2019 04:28 PM
Hi @p.hruby ,
That is totally supported because that is basically the way a Stretched Fabric topology works:
Remi Astruc
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide