05-02-2016 12:41 PM - edited 03-01-2019 04:57 AM
Hi,
I have tried to upgrade the APICs of the ACI infrastructure to the version 1.2(3c) but the upgrade wasn't sucessfull and when the APIC reboot, it try to boot in the new version, but there are not this version installed. So I need to select manually in the GRUB the correct version.
And when I try to upgrade the APIC to other version, I have this fault:
"Controller 1 failed to upgrade to apic-1.0(4q). The upgrade has an upgrade status of Failed - . The failure occured at the Updating Grub/efiboot Boot Manager stage of the install."
The actual version is 1.0(2j).
Thanks,
James
05-11-2016 05:57 AM
James,
Are you still experiencing issues?
You may be running into the following:
CSCut41444 - Free up loop devices on install failures..
root@ifav55-ifc1:~# df Filesystem 1K-blocks Used Available Use% Mounted on <snip> /firmware/fwrepos/fwrepo/aci-apic-dk9.1.1.1j-broken.iso 3982694 3982694 0 100% /tmp/tmpYTNfPF /tmp/tmpYTNfPF/images/install.img 205952 205952 0 100% /tmp/tmp9en0R2 /firmware/fwrepos/fwrepo/aci-apic-dk9.1.1.1j-broke n.iso 3982694 3982694 0 100% /tmp/tmpIFxfE7 /tmp/tmpIFxfE7/images/install.img 205952 205952 0 100% /tmp/tmpdEgIH0 /firmware/fwrepos/fwrepo/aci-apic-dk9.1.1.1j-broke n.iso 3982694 3982694 0 100% /tmp/tmpw8HY3W /tmp/tmpw8HY3W/images/install.img 205952 205952 0 100% /tmp/tmpfMD74k /firmware/fwrepos/fwrepo/aci-apic-dk9.1.1.1j.bin 3982694 3982694 0 100% /tmp/tmpuddSrE /tmp/tmpuddSrE/images/install.img 205952 205952 0 100% /tmp/tmpoliSrw /dev/dm-11 41282880 5854708 33331124 15% /rfs1
root@ifav55-ifc1:~# umount /tmp/tmpoliSrw root@ifav55-ifc1:~# umount /tmp/tmpuddSrE
06-03-2016 11:25 AM
Hi Thomas,
I have already tryed to reboot the apic, but the problem did not solve. When I try the command "df", this is the output:
admin@apic2:~> df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/dm-1 37154368 9600340 25666696 28% /
tmpfs 4194304 52048 4142256 2% /dev/shm
tmpfs 32852268 636 32851632 1% /tmp
df: `/boot': No such file or directory
df: `/efiboot': No such file or directory
/dev/mapper/vg_ifc0_ssd-data
37154368 9600340 25666696 28% /data
df: `/logs': No such file or directory
df: `/dmecores': No such file or directory
df: `/techsupport': No such file or directory
/dev/mapper/vg_ifc0-firmware
37156416 4912612 30356368 14% /firmware
df: `/scratch': No such file or directory
df: `/data2': No such file or directory
df: `/data/log': No such file or directory
df: `/data/shell-data': No such file or directory
df: `/rfs2': No such file or directory
df: `/securedata': No such file or directory
df: `/var/run/bashroot/.aci': No such file or directory
And I don't have root access for this equipments.
Thaks
06-03-2016 12:27 PM
James,
Can you ssh to one of the APICs and get the output of the CLI command "firmware list" & "version"?
Did you put 1.0(4q) in the firmware repository? Did you try a Policy Upgrade?
You may want to open a TAC case and they engineer will be able to help you out on this issue.
Thanks
T.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide