07-20-2016 12:11 PM - edited 03-01-2019 05:00 AM
I inherited a configured fabric, with 1 controller in the cluster. I am adding the other 2, and need to know what the preconfigured VTEP pool was set to, when the original controller was set up.
thanks
Solved! Go to Solution.
07-20-2016 12:44 PM
Hello!
In 2.0.x, you can find the information under Fabric > Inventory, and each Pod will have an entry under 'POD Fabric Setup Policy',
In earlier versions, you can ssh to the APIC and look at the output of 'acidiag avread'. There will be an entry TEP ADDRESS=. That should give you the current TEP pool allocated.
Example Output:
apic1# acidiag avread
Local appliance ID=1 ADDRESS=10.0.0.1 TEP ADDRESS=10.0.0.0/16 CHASSIS_ID=88397774-3ca1-11e6-ad19-6127bd4cf737
Cluster of 1 lm(t):1(zeroTime) appliances (out of targeted 1 lm(t):1(2016-06-30T16:00:29.720+00:00)) with FABRIC_DOMAIN name=ACI Fabric1 set to version=apic-1.3(2h) lm(t):1(2016-06-30T16:00:36.659+00:00); discoveryMode=PERMISSIVE lm(t):0(1970-01-01T00:00:00.001+00:00)
07-20-2016 12:44 PM
Hello!
In 2.0.x, you can find the information under Fabric > Inventory, and each Pod will have an entry under 'POD Fabric Setup Policy',
In earlier versions, you can ssh to the APIC and look at the output of 'acidiag avread'. There will be an entry TEP ADDRESS=. That should give you the current TEP pool allocated.
Example Output:
apic1# acidiag avread
Local appliance ID=1 ADDRESS=10.0.0.1 TEP ADDRESS=10.0.0.0/16 CHASSIS_ID=88397774-3ca1-11e6-ad19-6127bd4cf737
Cluster of 1 lm(t):1(zeroTime) appliances (out of targeted 1 lm(t):1(2016-06-30T16:00:29.720+00:00)) with FABRIC_DOMAIN name=ACI Fabric1 set to version=apic-1.3(2h) lm(t):1(2016-06-30T16:00:36.659+00:00); discoveryMode=PERMISSIVE lm(t):0(1970-01-01T00:00:00.001+00:00)
07-20-2016 01:51 PM
Perfect!
thank you!
07-20-2016 01:56 PM
No problem! Actually the acidiag command will work even in 2.0 versions. In 1.x there may be a way to see the exact VTEP pool used from the GUI, but I am not quite sure where it can be found as it wasn't where I thought (on the Controller details page).
10-10-2022 11:51 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide