Where to report errors in the "Cisco APIC Online Help"

[Christoph Neulinger]

I just discovered an error in the "Cisco APIC Online Help" of the Authentication "Fallback Check".

Where could I report that?

[Sergiu.Daniluk]

Hi @Christoph Neulinger 

There is a "feedback" button you can use to make any suggestions:

Stay safe,

Sergiu

[Christoph Neulinger]

Hi @Sergiu.Daniluk,

that'S from the top right corner of APIC?

I only see four Buttons in my APIC.

Christoph

[Sergiu.Daniluk · Accepted solution]

Yes, its from APIC GUI, running version 5.x

If you have an older version, simply use the feedback button from any whitepaper or config guide.

Example:

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/4-x/troubleshooting/Cisco-APIC-Troubleshooting-Guide-401/b_APIC_Troubleshooting_4x_chapter_0100.html

On the right side, you have a Feedback hyperlink

Stay safe,

Sergiu