I have one l3out using static routes to reach some remote networks. Those remote networks I want to get them redistributed on another l3out running OSPF and, at the same time change the default tag since they will enter the ACI fabric later (no routing-loops) Additionally, instead of manually adding every single subnet, I want to use the "aggregate" option.
Redistribution works fine, however tagging does not get well with aggregation. If I add the exact subnet, the prefix is correctly tagged, however if I add the summary prefix with the aggregate option the prefix is redistributed but with the default tag. Is it possible to use aggregation and tagging at the same time?
I'm using the "default-export" route-map with the "match routing policy only" type selected.
常见的数据中心之间通信均会采用运营商MSTP/OTN专线进行互联实现通信，由于长途线路价格昂贵通常我们需要最大化使用线路带宽，传统的网络传输中通常是尽力而为传输一旦突发流量较大就会发生线路拥塞的情况，从而影响业务正常通信传输。这时候我们可以采用Qos技术来实现数据中心思科设备之间关键网络流量保障，从而实现链路最大化利用。拓扑图场景如下：如上图，SW01是位于数据中心A的广域网接入Cisco Nexus 3048交换机，SW02是位于数据中心B的广域网接...
Cloud Networking Community on Cisco Customer Connection
Join our community!!
As a valued Cisco Cloud Networking (former DCN) customer, you can be part of Cisco Customer Connection Program (CCP), Cisco’s global online community program. Connect ...
Join us for a live demo of Cisco Intersight Cloud Orchestrator to learn how you can simplify the orchestration and automation of your infrastructure and workloads across your hybrid cloud environment. We will take a closer look at Cisco Intersight Cloud O...
Hybrid Cloud Demo Series: Simplify Orchestration of Your Infrastructure and Workloads
Tuesday, September 7, 202110:00 am Pacific Time(San Francisco, GMT-08:00)Join us for a live demo of Cisco Intersight Cloud Orchestrator to learn how you can simpli...
Hybrid Cloud Demo Series: Simplify your hybrid cloud environment with Cisco Cloud ACI
Tuesday, August 24, 202110:00 am Pacific Time(San Francisco, GMT-08:00)Join us for a special Hybrid Cloud Demo Series webinar featuring Cisco Cloud Application Cen...