about the "show"command to realize CSM loading

[yueric]

Hi,

What information about CSM loading can I get from by using "sh ip slb tech-support",and I used "show ip slb stats" (the CSM mode is csm),what's the difference of "connection destroyed" and "connection failed",any reply will be very appreciated.

[seilsz]

Hi,

"Connections Destroyed" are the total number of connections that have been closed (for whatever reason). This stat should usually be close to [Connections Created - Connections Current].

The "Connections Failed" counter is incremented when 1) The server does not reply to a client SYN request, or 2) The server responds to a client SYN request with a RST.

~Zach

[yueric]

Hi,

Thanks for the reply,it's really helpful.Do you know how to realize the CSM loading by using any "show"command?

[seilsz]

The command:

show mod csm X tech-support utilization

where X is the slot # where your CSM is installed.

You can also play with 'show mod csm X tech-support ?' to view numberous statistical counters.

~Zach