07-24-2012 12:34 PM
Hi
THis may be a silly question but can I put multiple rservers in multiple server farms?
So for example rserver1 and rserver2 are put in serverfarm production1 and are in use with particular sticky and load balancing settings.
Can I then create serverfarm test_production and put both rserver1 and rserver2 in it? Then play around with the sticky and load balancing settings as a test without affecting the production serverfarm.
Thanks, St.
Solved! Go to Solution.
07-24-2012 12:59 PM
You can put rservers in multiple serverfarms at the same time. Using policy and class maps you determine which traffic will get sent to each serverfarm.
You can then use a Layer 7 class map to direct any traffic from www.domain.com to production serverfarm and another class map to direct traffic from test.domain.com to a different serverfarm. Any load balancing changes only will affect the classmap.
Obviously your servers will would have to multiple virtual hosts to serve out traffic for both domains.
07-24-2012 12:59 PM
You can put rservers in multiple serverfarms at the same time. Using policy and class maps you determine which traffic will get sent to each serverfarm.
You can then use a Layer 7 class map to direct any traffic from www.domain.com to production serverfarm and another class map to direct traffic from test.domain.com to a different serverfarm. Any load balancing changes only will affect the classmap.
Obviously your servers will would have to multiple virtual hosts to serve out traffic for both domains.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide