Hi everyone.
I would like to check the following ace configuration,
My main question is that the ace config like below is same function?
case.1
serverfarm host NAME_of_SERVERFARM
rserver REAL01
probe TCP50000
inservice
rserver REAL02
probe TCP50000
inservice
case.2
serverfarm host NAME_of_SERVERFARM
probe TCP50000
rserver REAL01
inservice
rserver REAL02
inservice
we forcus on probe,
in case,1 the probe is assigned on each real server, but in case2, the probe is only server farm, not on each rserver.
in this case. case1, case2 is same function? or not. Is there something special in two case?
finally!
in case.3
serverfarm host NAME_of_SERVERFARM
probe icmp
rserver REAL01
probe TCP50000
inservice
rserver REAL02
probe TCP50000
inservice
this case is in probe, on each rserver and server farm, on server farm check on icmp and rserver check the service port.
in that case, if just one probe is dead, the server farm declare the rserver is dead ,regardless of tcp is up.
Thank you.