Application Networking

In my lab I have CISCO 11500 series Load Balancer (Context Services Switches)and using layer 5 URl based algorithm. Anyhelp on this would be very great full to you.Please find below the service and content configuration;-service Server1  ip address 1...

Hi All,I was told on this board that a new version of the WAAS Mobile client would be released in the first week of April '10. New version would be compatible with Vista & Win7 both 32 & 64 bit versions.I cant find the original thread to follow up so...

We're running ACE SM (A2_1_.5a) in bridge mode and have 4 rservers in the serverfarm, where 2 of them are directly connected and the other 2 are disjointed. We would obviously have to SNAT the disjointed servers, however since they are all in the sam...

Documentation describe the usage of weight to provide graceful server shutdown.My testing with a telnet session is that you get a fairly graceful shutdown with the suspend command, telnet continue with the initial server until it end.What is then the...

Can any one described how to configure cisco 4700 ACE load balancer .. i have 4 servers to be configured to load balance my http traffic and layer 7 application ..

The customer has the following problem. He uses cookie insertion by ACE4710 (ver A3(2.0)). All is working fine, but there is one exception:-( When the client uses VIP, the ACE load-balanced this request and "sticky" the client into server s1 (for exa...

Question... if the ACE module is configured with multiple contexts, and one of the contexts hits its max resource limitations for a given resource thereby resulting in dropping excess resources, will this cost the entire ACE system, or is it limited ...

Hi,I have a two new VIPs created ( http and https )VIP 1 = 10.10.20.15 80      ( Real Servers 192.168.10.45 and 192.168.10.55 listing on port 80 )VIP 2 = 10.10.20.15 443    ( Real Servers 192.168.10.45 and 192.168.10.55 listing on port 443 )I would l...