04-17-2009 06:21 AM
VIP : 10.10.10.10:8000
rserver server1
ip address 10.10.10.1
serverfarm SFARM1
rserver server1 8001
probe Probe_8001
rserver server2 8002
probe Probe_8002
rserver server3 8003
probe Probe_8003
rserver server4 8004
probe Probe_8004
I would like to loadbalance on just one single ip address and multiple ports like
above configuration on ACE. Is It possible configuration? please check
thank you.
04-17-2009 06:35 AM
See my response to your other post.
G.
04-17-2009 03:16 PM
ok. thank your response.
I picked up your configuration as follows:
rserver Server1
ip address 10.10.10.1
inservice
serverfarm Farm1
rserver Server1 8001
inservice
rserver Server1 8002
inservice
rserver Server1 8003
inservice
class-map MyVip
match virtual 10.10.10.10 tcp eq 8000
policy type loadbalance http first MyPolicy
class class-default
serverfarm Farm1
policy multimatch SLB
class MyVip
load policy MyPolicy
load vip inservice
interface vlan X
service in SLB
I know that there is no problem to configure one real server attached multiple service port for configuring SLB.
But I must healcheck on each multiple ports although one real server.
for example:
rserver Server1 8001
probe probe_8001
inservice
Is it working well?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide