ACE Configuration Check

[syjeon]

VIP : 10.10.10.10:8000

rserver server1

ip address 10.10.10.1

serverfarm SFARM1

rserver server1 8001

probe Probe_8001

rserver server2 8002

probe Probe_8002

rserver server3 8003

probe Probe_8003

rserver server4 8004

probe Probe_8004

I would like to loadbalance on just one single ip address and multiple ports like

above configuration on ACE. Is It possible configuration? please check

thank you.

[Gilles Dufour]

See my response to your other post.

G.

[syjeon]

ok. thank your response.

I picked up your configuration as follows:

rserver Server1

ip address 10.10.10.1

inservice

serverfarm Farm1

rserver Server1 8001

inservice

rserver Server1 8002

inservice

rserver Server1 8003

inservice

class-map MyVip

match virtual 10.10.10.10 tcp eq 8000

policy type loadbalance http first MyPolicy

class class-default

serverfarm Farm1

policy multimatch SLB

class MyVip

load policy MyPolicy

load vip inservice

interface vlan X

service in SLB

I know that there is no problem to configure one real server attached multiple service port for configuring SLB.

But I must healcheck on each multiple ports although one real server.

for example:

rserver Server1 8001

probe probe_8001

inservice

Is it working well?