Application Networking

Hello,I have a question, is there any document that clarify the TCP changes while traffic passing via the WAAS .as I know the first WAE will increase the seq number with 2 bilions, but I need to know if the second WAE will decrease it before sending ...

Hi,When connecting to a 11501 via the console port, I'm being prompted with username/password prompt. Problem is I was never given this info and this CSS is in production. Is there anyway to access the Offline Diagnostic Menu without rebooting it ?Th...

Does anyone have a link or white paper on how resource allocations works on the ACE module ? How u configure a context for a resource and so forth?

Hi,Is it possible to schedule the ACE module to take a particular rserver out of service at a specific time?ThanksCameron

I recently replaced a Server 2003 cluster with a server 2008 cluster. After the migration my prepostioning stopped functioning. The virtual servers are named the same and all the credentials, etc are the same. If I go into one of the preposition defi...

show cms info says Pending(CM is busy, retry later).Both Core and Edge have the same message.Initially thet were all attached. Rebuilt CMS with 4.1.3 and now WAE r not attaching to CMS. Do they have to be same version as CMS? They are 4.1.1c.16.I can...

Dear All,Anybody knows if ACE support Cash redirection (transparent cash), if yes can you please give me a link for this .ThanksAmr Ahmed

Hi all,We're using the ACE with static NAT. We have three interfaces. One outside and two inside. On one of the insides we have a FTP server and on the other inside we have the client. The client needs to connect to the FTP server but he wants to con...

Is there a way for us to see from one screen which ports are being configured for the classifiers as opposed to edit an individual classifier to determine the port it's using?Thanks..

Hi, I have a need to change name servers as configured in each WAE. However after the changes are applied (via the all-devices group), and verified using 'show hosts' on each WAE, the WAE's are still attempting to use the old name server previously i...

hi all:GSS need to balance a FQDN, it has 2 answers for this FQDN: 10.1.1.1 and 20.1.1.1. So GSS need to poll this 2 IP to detect the IP alive or not. our requirement is GSS need to make sure all the node in the group alive, then it can return the IP...

Hi,Source: 2 Proxy serversDestination: 2 Application ServersCannot ping each others VIP.Can ping the real servers.Is there some issue about the same ACE, LB'ing Src & Dest VIPs.Response will be appreciated.ACE mod A2(1.2)

I have the following config in a CSM.vserver EXPLICIT-8080 virtual 10.10.10.30 tcp 8080 serverfarm EXPLICITF-8080 replicate csrp sticky replicate csrp connection persistent rebalance inservice! vserver TRNSPARENT-80 virtual 0.0.0.0 0.0.0.0 tcp www se...

FolksWhat will be equivalent config from CSS to ACE for the following config:ssl-server 72 cipher rsa-with-rc4-128-md5 12.12.12.12 81 ssl-server 72 vip address 12.167.24.187 ssl-server 72 rsakey turnleafkey ssl-server 72 rsacert turnleafstar1 ssl-ser...

FolksI have ace setup as active/standby . What we are noticing is on primary ace we can ping servers but on secondary we can't ping some servers See belowFrom Primary ACE:EWDC-T1ACE12-1/Education# ping 172.28.8.84 Pinging 172.28.8.84 with timeout = 2...