cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
517
Views
0
Helpful
1
Replies

ACE Context - Error: Resources in use

jonesadrian
Level 1
Level 1

Hi All,

I am trying to associate a resource to a newly created context to enable configuration of sticky sessions within the context. When I assigne the context to the Resource Member it comes back as errored Resources in Use. Any idea's how I can get this configured as my deadlines are tight (thanks to our web developers bringing forward a go-live date to Monday).

The Key configurations are here:

resource-class BRONZE
  limit-resource all minimum 0.01 maximum unlimited
  limit-resource sticky minimum 0.01 maximum unlimited
resource-class GOLD
  limit-resource all minimum 5.00 maximum unlimited
  limit-resource sticky minimum 5.00 maximum unlimited
resource-class RESERVE
  limit-resource all minimum 18.10 maximum equal-to-min
  limit-resource sticky minimum 18.11 maximum equal-to-min

context ACCTX_SPT_FRN
  description SPT Context
  allocate-interface vlan 1204
  allocate-interface vlan 1310
  allocate-interface vlan 1410
context ACCTX_SSM_FRN
  description SSM Context
  allocate-interface vlan 1213
  allocate-interface vlan 1313
  allocate-interface vlan 1413
  member GOLD
context reserve
  member RESERVE


Obviously not all contexts shown - there are 14 in Total - 1 reserve, 2 Bronze, 9 Gold and 2 unassigned (of which 1 needs to be Gold).

I saw in previous posts the resource usage was key to identifying where issue could be. As I am learning this beast, I couldn't fully make sense of the previous posts so apologies for this:

                                                     Allocation
        Resource         Current       Peak        Min        Max     Denied
-----------------------------------------------------------------------------
Context: Summary
  conc-connections         115391     217571    3601600   65976000          0
  mgmt-connections             69        326       2250      41250          0
  proxy-connections         27736      49687     472060    8647590          0
  xlates                        0          0     472060    8647590          0
  bandwidth              15037110 1503203965  450200000 3952032704       3915
  connection rate              76      11281     450200    8247000          0
  ssl-connections rate         10       1495       6754     123720          0
  mgmt-traffic rate           618     277886   56275000 1030875000          0
  mac-miss rate                 0        868        900      16500     100033
  inspect-conn rate             0          0       2700      49470          0
  acl-memory               102912     109392    3930522   43220012          0
  regexp                      104        104      52429     576507          0
  syslog buffer           4194304    4196352     209715    2306028          0
  syslog rate                   4        923        150       1649          0


Help is very much appreciated. There are no reported issues with current loads so the Denieds I take as a misnomer.

Regards

Adrian

1 Reply 1

Marko Leopold
Level 1
Level 1

From my first idea I would think you use more then 100% of your sticky resource. maybe you should provide the whole context config.

Review Cisco Networking for a $25 gift card