ACE Design

[Fernando Sacristan Navarro]

Hello,

I'm don't have many experience with Cisco ACE and I'd like to know if it's possible to have the clients and the servers located at the same VLAN (192.168.0.0/24). The clients will make the http request to a VIP address (10.0.0.10/24) and the ACE should redirect the request to the rservers located in the same VLAN.

Thanks in advance.

[rodrguti_2]

Hi Fernando,

To answer your question, yes, you can have clients and servers located in the same vlan, you will need to use a natpool here in order to avoid asymmetric flows, here you can find a couple of configuration examples which are very useful:

http://docwiki.cisco.com/wiki/Category:Data_Center_Application_Services_Configuration_Examples

Saludos,

Rodrigo

[Fernando Sacristan Navarro]

Hi Rodrigo,

Thank you very much for your answer. I'll check the examples.

Kind regards,

Fernando