10-31-2010 08:58 AM
I'm converting existing CSM configs to ACE4710. CSM has owner and contact config such as:
owner Web-Server
contact-info IT
Is there equivalent commands in ACE4710?
Thanks
10-31-2010 08:48 PM
There's not really an equivalent concept in the ACE. See the CSM-to-ACE Conversion tool guide for a Cisco source. The best analogy they cite is the use of contexts on the ACE, if desired but contexts are much more than the owner conept in CSS/CSM terminology.
11-01-2010 01:26 PM
Thanks for the info. I have another question about CSM command "predictor forward". In the current CSM config, one server farm is configured with predictor forward for direct access to real servers. How can I configure the same function in ACE so if the traffic is direted to the real server IP addresses (not the client VIP), it can be forwarded directly without going through load balancing algothrims?
Thanks again
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide