cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
881
Views
0
Helpful
6
Replies

ACE is not recieving any traffic on VIP

amitsharma23
Level 1
Level 1

Hi,

I have multiple vips running scenario, of which one vip is not functioning at all. I have bridged mode scenario. The probes for the rservers are showing as success and when i am trying to find the active connections using "show conn", i cant see any connection reaching ACE on that VIP. I can ping the VIP but unable to see any traffic on that VIP. When i telnet on the VIP on the port 8080 i can telnet, but on the browser its showing as Content Server error.

Attached is the ace configuration.

Thanks

Amit

6 Replies 6

amitsharma23
Level 1
Level 1

Just to add in above post, from command prompt iam able to telnet on the VIP ip address (192.168.3.145) on port 8080 and from the web browser i cant.

Thanks

Amit

Any web-browser proxy ? If yes i might try put 192.168.3.0/24 on

the exception list.

Dan

Hi Dan,

There isnt any web browser proxy and from the same workstation i can browse other vips on differnet port numbers as it can be found in the configuration. The issue is only with one VIP among multiple VIP configured

Thanks

Amit

Hi Dan,

To add, when i browse the rserver ip address on port 8080, it succeeds

Thanks

Amit

Amit ,

Can you post :

sh serverfarm CONTENT-SERVERS-8080
sh arp | i 192.168.3.145

sh arp | i 192.168.3.130
sh arp | i 192.168.3.140

Dan

Hi Dan,

Thanks for your reply. In a meanwhile, i restarted ACE and dont know why everything started working.

Thanks Amit

Review Cisco Networking for a $25 gift card