Hello,
I have some issues when use the graceful argument in a TCL script. I know that previously this feathre was not available, but it seems that in version A4(2.0) is available. But I have the same issues as previuos versions. I use the following commands for trouble shooting:
switch/Admin# show script LDAP1 LDAP
script : LDAP1
scripted probe : LDAP
instance
-----------------------------------------
probe-association(s) : (count=1)
----------------------------------
rserver : TEST2
--------------- script statistics --------------
Exit code = 30006
Child PID = 9054
Exit Message = :170.25.56.99:389: opening socket
Panic String =
Internal error = bad option "-graceful": must be -async, -myaddr, -myport, -server, -sslversion,
Last RunStart count= 186 , Last RunStart time= Mon Aug 15 18:39:19 2011
Last RunEnd count = 186 , Last RunEnd time = Mon Aug 15 18:39:19 2011
Last Probe OK count= 0 , Last Probe OK time= Never
Last ProbeFail = 0 , Last ProbeFail = Never
count , time
Last ForkFail count= 0 , Last ForkFail time= Never
Last Kill count = 0 , Last Kill time = Never
Last Panic count = 0 , Last Panic time = Never
Last Nodecreate = 0 , Last Nodecreate = Never
Error count , Error time
Last Unassociated = 0 , Last Unassociated = Never
Script count , Script time
Last Fail Internal = 186 , Last Fail Internal= Mon Aug 15 18:39:19 2011
Last Socket-Limit = 0 , Last Socket-Limit = Never
count , time
Last PV-Read count = 0 , Last PV-Read Time = Never
Last PData-Null = 0 , Last PData-Null = Never
count , time
Last Unknown count = 0 , Last Unknown time = Never
switch/Admin# show probe LDAP detail
probe : LDAP
type : SCRIPTED
state : ACTIVE
description :
----------------------------------------------
port : 0 address : 0.0.0.0 addr type : -
interval : 5 pass intvl : 5 pass count : 3
fail count: 3 recv timeout: 10
script filename : LDAP1
------------------ probe results ------------------
associations ip-address port porttype probes failed passed health
------------ ---------------+-----+--------+--------+--------+--------+------
rserver : TEST2
170.25.56.99 0 -- 231 231 0 FAILED
Socket state : RESET
No. Passed states : 0 No. Failed states : 1
No. Probes skipped : 0 Last status code : 30006
No. Out of Sockets : 0 No. Internal error: 0
Last disconnect err : Internal error: Script error
Last probe time : Mon Aug 15 18:43:04 2011
Last fail time : Mon Aug 15 18:23:55 2011
Last active time : Never
I only do a change in the LDAP script:
Previously:
set sock [ socket $ip $port ]
Now:
set sock [socket -graceful $ip $port ]
I think this enough, so the appliacen sends a FIN instead RST. Has anyone succeeded in configuring?
Thanks!
