ACE30 - Upgrading the Software image (how to?)

[sgonsalv]

Hi Guys,

Am looking to upgrade the software on the ACE30 from:

c6ace-t1k9-mz.A4_1_0.bin

to

c6ace-t1k9-mz.A90_6_3_5.bin

...and was wondering if someone can point me to the ACE30 guide that explains this.  Have looked at the ACE30 configuration guide which I thought would cover this in the section "Managing The ACE Software", however everything else has been covered off except how to go about upgrading the software.

If someone can point me to where I can find this it would be much appreciated.

thanks

Sheldon

[Daniel Arrondo Ostiz]

Hi Sheldon,

To upgrade/downgrade an ACE, you just need to point the boot parameters to the right software image. For more details on how to do this, check

http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/vA4_1_0/configuration/administration/guide/basiccfg.html#wp1437607

Anyway, the version c6ace-t1k9-mz.A90_6_3_5.bin is an internal version number used for development tracking, so you won't be able to download it from anywhere.  The latest versions available are A4.1.1, A4.2.2 or A5.1.1

I hope this helps

Daniel