Application Networking

Hi all,I am looking for how to replacing the failed disk with raid1 on an WAE-574 with version 4.4.3bAny sugestion?Jan Rockstedt

Is there a way to configure a probe so that if the probe fails allow the server to be taken out of the laodbalance pool, but to allow the current connections to stay connected.On condition that all the servers i.e failed and backup servers  belong to...

Dear all, I just deployed a nexus 7010 switch at a server farm. after deployment, it was notices that there are surges in latency across the network. The default gateway was then moved to the nexus, with this pinging from an host on the same subnet t...

Hi,Due to a special Branch Routing setup, where we're using DMVPN on a separate router (with a SRE module) as a backup WAN connection for a MPLS conenction, we probably need to put both WCCP redirect statements on the tunnel interface, in order to av...

Dears:I have a problem with the CSS11503. I need to balance DNS servers for the requests of these reach a vip you distribute the load. I use these links:http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_configuration_example09186a00801d0...

Users to a site (thissite.here.com, for example) have used both http://thissite.here.com and https://thissite.here.com for reasons lost in history...The (IIS) site has a certificate but its use is not mandated.In a new environment to whichi we are mi...

Hi guys,     After I test the Central Manager Failover procedure I'm viewing  this message in all devices      Unexpected CM activation timestamp warning     Alert: Current primary CM activation time stamp is older than this  node's CM time stamp. If...

Hello,We have a CSS 11503 with the following partial config==================service 10.10.10.221-1724 ip address 10.10.10.1 keepalive type tcp port 1724 keepalive port 1724 active service 10.10.10.222-1724   ip address 10.10.10.1   keepalive type...

Howdi! I've also posted this at www.networking-forum.com. Struggling to find if this is even possible...So i've been working on a global load balanced web hosted context based platform. Its working a treat but i've got a question on the VIP on the AC...

Hi everybody...A customer wants to loadbalance two router with an ACE 4710 !!So basically ( i told him that he can do it in other way..) but ..nothing !!!He wants to use a Loadbalancer !!!I tested in my lab creating a similar network topology...( sim...

Hi Guys,Am looking to upgrade the software on the ACE30 from:c6ace-t1k9-mz.A4_1_0.bintoc6ace-t1k9-mz.A90_6_3_5.bin...and was wondering if someone can point me to the ACE30 guide that explains this.  Have looked at the ACE30 configuration guide which ...

Hello,I have 2 CSS 11501 providing load-balancing rules and SSL termination.When CSS is used for downloading through the rules of SSL, the rates I get are quite lower than those obtained when the download is done either directly on the machine or by ...

Is there a software for monitoring ACE realtime with following metrics:- service overview per user, port, server or URL- total execution time of transaction - HTTP redirrection time- server response time- end-to-end transfter time- measuring number o...

Hi all,We have strange problem with outlook 2007 to an exchnage 2003 server.If we remove the check from the “Connect to Microsoft Exchange using HTTP” all is fine and if we enable it the connections is flapping to the server in outlook.Found CSCtg045...