Arrowpoint CS-800 Flows

[jivarva]

How is the maximun flows that support CS-800..??

I have a problem when flows go up to 7000.

Maybe, the "flow timeout" is the solution..??

This is the "flow stat"

Flow Manager Statistics - SFM Slot 9, Subslot 1:

Cur High Avg

UDP Flows per second 0 258 0

TCP Flows per second 47 1289 49

Total Flows per second 47 1291 49

Hits per second 167 543 179

--------------------------------------------------

Port Active Total TCP UDP

--------------------------------------------------

#11/1 310 56143045 310 0

#11/2 173 63890499 173 0

#11/3 352 63065305 352 0

#11/4 415 90889158 415 0

#11/5 223 60797707 223 0

#11/6 184 64834916 184 0

#11/7 0 7320611 0 0

#11/8 0 0 0 0

#12/1 338 106518647 338 0

#12/2 387 89681467 387 0

#12/3 265 43534400 265 0

#12/4 149 50599867 149 0

#12/5 0 0 0 0

#12/6 179 62061854 179 0

#12/7 0 0 0 0

#12/8 0 0 0 0

Flow Manager Statistics - SFM Slot 9, Subslot 2:

Cur High Avg

UDP Flows per second 0 245 0

TCP Flows per second 65 1274 51

Total Flows per second 65 1275 51

Hits per second 166 497 169

--------------------------------------------------

Port Active Total TCP UDP

--------------------------------------------------

#13/1 0 0 0 0

#13/2 377 41276241 377 0

#13/3 261 100451137 261 0

#13/4 154 52512707 154 0

#13/5 545 120438970 545 0

#13/6 0 0 0 0

#13/7 0 0 0 0

#14/1 0 0 0 0

#14/2 1 5360071 1 0

#14/6 4553 1223090599 4552 1

active-800#

[Gilles Dufour]

what version do you have ?

In which mode did you capture the flow stat ?

[did you capture it from debug/llama mode ?]

What kind of problem do you have ?

The CSS800 should be able to handle much more flow than 7000.

Regards,

Gilles.

[jivarva]

Hi Gilles,

Version is 5.00 Build 69

Mode enable, I just make a command "flow stat"

The problem is that when flow arrive to 7200, it reboot.

Note that the CSS800 is redundant on itself.

Thanks for your help

Javier