Application Networking

Hi Guys,My CE is acting as a transparent proxy ('http proxy outgoing host 10.247.1.63 8080 primary'), which is sitting between my network and a proxy server.My web broswer has a script that decides wheather to hit a proxy server (8080) or hit direct ...

How is the maximun flows that support CS-800..??I have a problem when flows go up to 7000.Maybe, the "flow timeout" is the solution..??This is the "flow stat"Flow Manager Statistics - SFM Slot 9, Subslot 1: Cur High AvgUDP Flows per second 0 258 0TCP...

Hi,I have the question about sending the client certificate to the back-end server. Is it possible? I need to resend the client certificate from the ssl module to the back end server for authentication and accounting. I will terminate the client sess...

I'm trying to upgrade my css-11151's since I'm hitting a bug in my current version (5.00 Build 105). 5.00 Build 503 and 5.00 Build 605 havethe Internal RX error issues so I'm lookingat 5.00 Build 403. Build 403 has a few openbugs, one of which is:"CS...

We are trying to pass a client certificate from the SCA to a back end IIS server so that the IIS server can authenticate the user against Windows AD. When we enable the Add Client Certificate Info option in the "Add HTTP Headers to backend HTTP Strea...

My CSS is currently in a one-armed transparent proxy configuration with multiple default gateways (as specified in Cisco's configuration example). When the CSS pings odd number IP addresses it sources the ping with its VLAN1 IP address.. If it pings ...

I CAN'T FIND INFORMATION ABOUT A RECOMMENDED VENDOR THAT CAN PROVIDE A DFP AGENT FOR MY SOLARIS APPLICATION SERVERS SO I CAN SUCCESSFULLY DEPLOY DFP ON MY CSS.ANY IDEA/INFO WILL BE APPRECIATED...THANKSMANUEL

Hi,I have the following scenario:2 webserver running each one ports 80,81,82,83,84and i have a content rule defined in port 80.At the end i want that all the request that comes to the VIP port 80 be balanced through the 2 webservers in the differents...

Hi,I have the following scenario:2 webserver running each one ports 80,81,82,83,84and i have a content rule defined in port 80.At the end i want that all the request that comes to the VIP port 80 be balanced through the 2 webservers in the differents...

CSM Config below. Configured FTP 4 redundancy. Is there a way 2 tie PRIMARYOUTBOUND SF/VS probes 2 FTPOUT SF/VS so I don't have 2 send additional pings 2 remote side. Current setup requires each new SF/VS pair 2 send pings 2 remote side - Doesn't see...

Hi,I've got a couple of questions relating to CSS SSL termination which hopefully someone can help with:- is it possible to terminate an SSL connection on the CSS, pass the session through a cache engine/reverse proxy for content checking, then back ...

Hello,I am tasked with writing a paper that explains the three modes (bride, route, one-armed) of the CMS. I have accomplished this task. I have also been tasked with explaining, in detail, why one mode is better than the other modes, when they are a...

Hello, I apologize if this is a newbie question that has been asked a thousand times, but...I have inherited a one-armed setup (11501) with this unit out on a DMZ.It will be accessed both from the internet, and the inside network. (10.x.x.x)I have tw...