Application Networking

Hi there,We have a CSS11501 box with no SSL module.In just a VIP we are load sharing four HTTP/HTTPS servers and certificates installed in the IIS servers.With the only one VIP and the same certificate in the servers, we're trying to do the following...

I understand once  ACE determines which back-end load balanced server is getting tha packet based on the load balance algorithm, it then performs an implicit destination NAT that changes the dest address of the packet to that of the back-end server's...

HI,We had deployed a wae farm using 4  wae-7341, we are using a wccp v2 as interception method from a 7609 router, we see  often one  wae support more traffic than others, we try to balance them using the parameter  weight into the WAEs, like this: ...

Hello,I've got another CSS keepalive problem... I have the following global keepalive set in the config:keepalive vm1-Global   port 88   method get   uri "/health.aspx"   hash "d6e8071019a79ae0ac2b13b973b4ba0f"   ip address 192.168.102.70   activeThe...

I have ACE 4710 and I need configuration:I have real web-server with  folders : /1/index.html, /2/index.html, /3/index.htmlI need to  balance virtual service: If I try to connect URL: http://server/index.html,  then ACE balance amonghttp://real_serve...

Hello everyone -We've recently purchased a Cisco WAAS solution 2x WAE 674 applicances, and I find myself running into a few questions.  I'm configuring the devices in a test enviornment, just to get familliar with the interfaces / OS / CLI.Our WAAS d...

Hi ALL !cI connect Cisco CSS to the scheme (2 MS Windows 2003 Server -> Cisco CSS ->  Cisco ASA)I monitor VIP service on Cisco CSS from inside and outside but CSS 11503 regularly fails:Chart of HTTP/HTTPS VIP service:PS: Red dots - this is service do...

Hi AllMy new job is my introduction to the CSS, so I have zero experience with it.We have a CSS 11503 v8.10 distributing connections across a farm of 10 servers.  We have noticed that there is always one or two particular servers handle the bulk of t...

HelloI have a question about sticky for MS Terminal services. Now I have one 4710 demo box and MS terminal servers farm containg 15 servers. All servers running Windows 2003 Standard Edition. ACE working in bridge mode. Sticky config:sticky ip-netmas...

We're running ACE SM ver. A2(1.5a). Does anyone happen to know if it supports 2048 bit cert?Thanks..

Hi,,,I want to know that what do we need at SSL based Servers to be ready for such type of configuration....In this configuration, ACE behaves as SSL Client while Load Balalnced Servers are serving as SSL Server. Do they need Certificate or Key to be...