is it recommanded to reboot all networking equipents which are on for 24 hours once in six month time ?is there any documentation related to this please let us kowregards pushpak
I am trying to understand in more detail what occurs when a CSS times out a flow. Looking at sniffer traces on both sides of the CSS (running release 8.2) it appears the CSS does not of itself initiate any FIN or reset of both sides of the connection...
on the CSS11506 is it possible tp disable pat on a selected range of source ports for TCP? I'm having an issue with a new version of Symantec backup software. The software appears to be expecting the source port to be translated when connectin to tcp...
Hi,I have implemented ASR on my two CSS. prior to that the performance of the servers in terms of getting web pages was good. Now after I implemented ASR , the performance of servers are affected, there is a bit slowness.does ASR really affect the pe...
Hi,I have a strange behavior on a ACE blade :The blade is configured in bridge mode, when a configured reals server, if they are on the same site, the probe is ok, if they are on another site, the probe is failed.What I found is that the echo reply o...
Hi folks.Can someone please talk to me about how WAAS caches per-peer, specifically about how a Core WAE allocates storage to each Edge? The WAE datasheets indicate that a 7341 has 4 X 300 GB HDDs in RAID 5. How much of that is actually available f...
Hi,I use the CSS to do redirection but I don't see an option to specify the type of redirect. I'd like to do a permanent redirect (301) instead of a temporary redirect (302). Search engines apparently don't like type 302 redirect and this affects my ...
We have a WAE612 as the WAAS engine and WAE512 as the CM. There are 4 remote sites with WAE512's at each site as edge devices. 3 of the 4 edge devices show up and work correctly.But there is one edge that does not show up in the list of edge device...
I've been trying to setup a WAE 612 w/ ACNS 5.5.5, and I've run into a few problems. The goal is to setup a transparent forward proxy for WMT files. This is a standalone unit. The edge router that this device is hooked up to is a Cisco 7206VXR run...
Hi,I have two C6K with CSM-S in place. After I have imported all the certificates and keys on the SSL daughter card of the primary CSM-S I want to synchronize this with the SSL daughter card of the secondary CSM-S. There's a way to synchronize the co...
Hello, I have recently deployed an 11 site WAAS solution with 512s at all the branches and a 612s at two "central" locations. I am running WAFS and have enabled prepositioning to push out user files to each location. As I pushed the files, the "prepo...
Hi,on ACE (Version 1) i can make HTTP Probes via GET or HEAD.When i use a HEAD Request only the HTTP Code is checked.When i use the GET Request the body is also retruned and i can search for a string in the body. Also there seems to be ha hash calcul...
We have CSS 11503 which is configured for load balancing for two servers.We have configured 3 services for load balancing.Now we want to check how much load is distributed on each servers.How we can see this?
