Application Networking

Hello, I've been trying for two days to understand how no to NAT server initiated flows.The IPERF servers always sees the VIP as source address. I would like to see the real server's IP as source address.I don't see what wrong in my config.Here's wh...

Dear Frends,I have a website www.xxx.com , which is assigned to a public IP and it is coming to my CSM and then going to the real servers.Now my concern here is that if my reals are down, I want to redirect my url to www.yyy.com , which is another 3r...

Greetings allI've been testing FTP service through our CSM for about a day now and has run into an issue I can't find an answer for.Here are the settings I'm currently using for the vserver and serverfarm. The 10.90.1.0 network is routed from my clie...

can anybody please let me know what is the advantages of having a wae as a print server as opposed to a MS print server?Thanks...

Hi All,Is it ok to simultaneously enable the DNS and DHCP server of the CNR on one machine. Our CNR is currently used as a DNS server which is load balanced behind a CSS11506. We want to enable the DHCP feature. Will there be any issues with this se...

Has anyone had any problems with using SLB and a real server that is a vmware guest OS? I've recently configred IOS SLB on a 3725 router in my network and the server farm config that has physicals hasn't had any problems, however my other serverfarm ...

hi i need some help about checksum field in lsa when a router receives more than single lsa of same type from the same advertising router, it follows the following step in selectionsequence number if the sequence numbers are same then check the chec...

Good morning;I hope this is the right forum so here it goes. I have an ACS server v4 that keep hanging. If I try to restart the server (CSAuth), the service hangs and the only thing I can do is restart the server. Is there something I can do to fi...

Hi everyone,I have a question how configure Router I/F to avoid redirection loop.I understand Router and WAE must not be attached to the same segment to avoid redirection loop as written in the Quick Configuration Guide.However the sample configurati...

Hi all, I have just installed the NIST software and it comes up fine, but I was wondering what I have to do to get it to recognize all of my network interfaces? I have a total of 5 with an on-board interface and an added 4-port NIC installed. Cure...

We would like return traffic from one group of servers to follow one default route, and the return traffic from a different group of server to follow a different default route.Will the CSS allow this configuration?Thanks!

Hi,Can someone send me a link or any Doc which guide me how to use multicasting on CSS to elimenate unnecessary boardcast.Regards,

Hello, team!I can't find any information about configuration GSS DNS forwarding feature .I config answer type NS for IP of my DNS. Is it all or I must config anything more ?If you have any links, please post it.

Hi All, We have installed a css 11501 to do simple http redirect load balancing. Things seem to be working, but there is one problem. Http traffic doesn't seem to be able to leave the NATed net behind the CSS. Meaning if you browse to the redirec...