Application Networking

I have not come across any documentation showing any example or configuration guide on configuring a CSM in single or fault tolerant mode in CAT6500 running CatOS and IOS on the MSFC. Any points will be much appreciated because I have to do one tommo...

I have two CAT 6509 switches with a CSM module in slot 3 in SW1 and a CSM module in slot 8 in SW2.From the router config when I type - module ContentSwitch 3 on MSFC in SW1 - it takes more than a minute to get the CSM config prompt. Then every comman...

Hi All~I tried VIP reduandancy using a CSS pair and it didnt work.Currently we have a flat network in our staging environment.Only one VLAN 100 is serving all machines.I was asked to introduce a CSS pair for some application testing.I introduced anot...

Good day,Just like to find out what does the "ssl-server xxx cipher" command do? is it something to do with SSL module & web servers communication?i have this command on my configuration but it seems that the CSS donot talk to the web servers properl...

Hello, Group. I am attempting to apply a custom KAL script on a service, which will do the following:1. Do a TCP connection to host A on port 8080.2. Do a TCP connection to host B on port 8080.3. Ping host C.If any of the above fail, the service shou...

Is there anyway to diagnose cpu spikes on the CSS or possibly decipher the output from the "cpu hog" debug? Thanks

Hi,Just interested if anyone has seen ping dropouts when the CE can't see its default-gateway.Setup:CE 10.1.1.1/24PC 10.1.1.2/24Router 10.1.1.254/24The CE is setup with the default-gateway of 10.1.1.254.When the router is on the network, the PC can r...

Iwill like to know how to configure my server to bult up a LAN.If there are security to set on.

I am trying to get the configs from CSS 11050 to my CiscoWorks server.. Is there any special configuration on the CSS in order for this to work?ThanksMax

Hi Giles,Just wondering if it is possible to have all the connections establised on the CSM and SSL modules logged to a specified TFTP server?thanksSheldon

IS is possible to script keepalives to monitor host header sites? Using a simple HTTP keepalive doesn't work because the server will always respond to a http get if another site is up and running.Not sure if you can do it by checking the headers or b...

Hi we have 2 ftp-server (Server 1 and Server 2) behind our loadbalancer. Is possible to replicate the content of Server 1 to Server 2 and the content from Server 2 to Server 1 ?. In one case is Server 1 the subscriber and in the other case is Server ...

I am currently trying to setup a CSS11503 to perform SSL full proxy and there are some logic that I cannot understand.Current configuration:!*** SSL PROXY LIST*****ssl-proxy-list SSL-LIST01 ssl-server 100 ssl-server 100 vip address 10.180.6.1 ssl-ser...

I have a CSS11503 running v7.30.1.06. I was reviewing the newer versions of code and noticed a-lot of open issues in the release notes. Does anyone have an opinion which version is the most stable or if I should update at all?