Application Networking

I've got a CSS 11503 running WebNS 7.40 that I'm setting up to set up to perform SSL termination and loadbalancing across three Outlook Web Access servers. At first, when logging onto the server, I would get errors on the page and the left nav bar wo...

Our CE (which is our proxy server) constantly stops forwarding traffic to the internet. The engine does not freeze or lock up because I can telnet into it and reload and everything is fine then. This has starting happening in the last two weeks. The ...

I need some guidance please. My company as an exchange server, a time-card server and a web server. Each site has a thawte certificate specifying the full fqdn and directory path.We've chosen to now implement a CSS11501 (with ssl) and terminate the S...

Hello all,my CSS 11150 with WebNS 5.00 does excessive arp requests on its interfaces (up to 100 arps per second). The box seems to arp EVERYTHING especially in the 10.147.0.0 /16 subnet even if it is not used at all. My config is as follows: ip no-i...

Hi folks!!Our CSS11501 was LB of 5 servers, port 443, but the number of established conections was increasing until that service stoped.That servers are: IBM X.series - Red Hat 7.3 - Apache and Websphere.The same situation was happened with other 2 s...

Two active/standby CSM's configured in tow Switch box. CSM is active. the other is standby.Two CSM show different connection information. - Active : 1159, Standby : 227Why different result has shown ?Do Active CSM working loadbalancing, and Standby...

Does the 11503 or 11506 support any sort of port aggregation, like etherchannel, to support larger pipes than 1Gb?Thanks,Patrick

We have a CSM on a 6500. I want to be able to loadbalance based on SERVER health - cpu/memory.I was wondering if anyone had any thoughts on what the best way to go about this.Would it be via a health probe or does it need to be an XML config?thanks,E...

Hi,using a 11503 having booted sg0730106 I can't access the real servers directly.My config is: ip redundancy master ip route 0.0.0.0 0.0.0.0 10.147.1.1 1 circuit VLAN1 redundancy description "Server" ip address 10.145.45.1 255.255.255.224 ci...

I have two CSS running vip redundancy,ip interface redundancy and redundant-index on a ASR active-backup model.They are attached to separate 3750 which share vlan info via a port channel.When the master fails, we see the VRIR negotiation and mastersh...

Hi,i'm using CSS 11501 to load balance some web servers using src IP.if one src IP is directed to certain web server, How much time has to pass for this same src IP to be directed to other web server?Thank you in advance!

Hi Folks,Those of you work on GSS and Disaster recovery, you guys know all MS IE browser caching issue where it can take upto 30 minutes for the broweser cache to exprie. I recently read somewhere (most probably MS KB) that with XP SP1 and onwards, b...

In my enviroment lab, I´ve configured multiples vlans servers in CSM module, each vlan server belongs to a different subnet.Is there some way to prevent real servers from a vlan server to access real servers from a different vlan server?

Hi,I have script (only skelet):socket connect host ...socket send ...socket inspect ...When I do this commands from console, I see that socket inspect prints some output.But when I play this script with script play, I see nothing.Should I do somethin...