Cisco ACE 4710 - Local Triangulation

[Aldo Pellini]

Hi to all,

I need to balance some servers in same network and same VLAN of cisco ace and servers has configured a loopback interface with Virtual IP configured IP.

In logical way configuration is following

10.168.200.250 -- ACE -- Server1 (lo0 - 10.168.200.250 eth0 - 10.168.200.14)

                                  -- Server2 (lo0 - 10.168.200.250 eth0 - 10.168.200.15)

Is feasible for ACE Appliance this configuration?

[Surya ARBY]

You want to do "direct server return" right ?

Yes it's possible; disable normalization also.

here is the full config.

http://snippets101.blogspot.fr/2008/08/asymmetric-server-normalization-on.html

[Aldo Pellini]

Yes radware calls local triangulation. I have found it on server load balance guide after posting it cisco calls it ASN.

Thanks!