cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1269
Views
0
Helpful
3
Replies

Cisco WAVE 694 oe694-6.1.1.26

richcomscisco
Level 1
Level 1

Hi 

After a upgrade from waas-universal-5.5.5a.9-k9.bin to the above version the unit will not come on line.

the unit is saying it is license "not active" in the CMS but from the command line it is

WAEOP1#sh license
License Name Status Activation Date Activated By
-------------- ----------- --------------- --------------
Transport not active
Enterprise active 05/10/2016 CMS

also after the upgrade the ASR 1001-x routers is not forwarding traffic via appnav to the WAAS device.

Any ideas

3 Replies 3

richcomscisco
Level 1
Level 1

After a reboot the WAAS came back on line!

however the unit is still not getting sent any traffic for acceleration!

Also 

Is this a error of the WAVE 694 device or the disks

Don't know you managed to fix this ?

Try to do a "show disk details"

Best Regards

Finn

Review Cisco Networking for a $25 gift card