Application Networking

Hi everyone i need to config a EEM applet with multiple statement of track but i can't accomplish this i use NXOS, event manager applet multi event track tag one 1 down event track tag two 2 up tag one and two happens 1 in 1 action 1.0 cli conf t ac...

Hi Friends,   We have installed 2 Nexus 9372PX-E and planing to connect it to 2 Nexus 2348UPQ, so each Nexus 9K will connect to one Nexus 2K. We can't connect Nexus 2K to 40 Gig port on Nexus 9K due to the limitation of 9K ALE ports (40Gig). So on 2K...

We need your help ! We are facing issue with WAE device model WAE-5SM-SRE-710-K9 as not accessing through telnet. We have configuring  the WAE - SM-SRE-710-K9 Module on CISCO2921/K9 - Version 15.4(3)M1 . Problem is we are unable get telnet our SM-SRE...

Hi my name is Ivan I have a question Wich are thw bandwith system to the platform 6800 catalyst in each model (6807, 6840, 6880). I need to find a catalyst 6800 with 1.44 TB in bandwith system, and with interfaces 40GB, 10GB and with support Q-in-Q I...

Hi, Dose Nexus 9508 support openflow in the future? Best Wishes, Alan

Hey, have a customer that is looking to replace their N7Ks with N9Ks. They rely on WCCP for Websense redirection and need make sure ITD will provide the same functionality. I have read that ITD should be able to do this but have yet to find and confi...

Greetings In the compatibility matrix : http://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/10GE_Tx_Matrix.html#_ftnref4 look at the follow table: N5K-C5548P-FA N55-M16P N55-M8P8FP SFP-10G-SR SFP-...

Hi, We are considering WAAS as an optimization solution. However we have many homegrown applications. From what I have read so far, it seems like WAAS needs some configuration to correctly handle some applications. What will be necessary for us to co...

Hi we are using Cisco Wide Area Application Services module in router, Waas software version is 5.2.1 we want to downgrade to 4.3.3 plz help us to how to downgrade 5.2.1 to 4.3.3 Router - CISCO2921/K9 and Waas Services module - SM-SRE-710-K9  

Hi ! We are unable to ping WAAS WAE -7341 -k9  ip address! i was check the cable and Reset also ! we are unable ping 1 We are getting system locator led indication on devices  regards Asif

Hello all,currently I have a network scenario with a couple a Cisco Nexus 5596UP and several Cisco Nexus 2000 (2232PP, 2248TP ecc.) connected to the parent switch (N5K) in single-homed FEX topology. Is it possible to convert the N2K from single-homed...

Hi experts, The client want to using PBR for WAF application, but I cannot enable this feature on both nexus 5548 and 5596. These devices both add a L3 daughter card for L3 feature. I checked the license and guide for this feature. I am sure both ...