10-04-2012 11:04 PM
Hi,
Command to know how long the session from client is Active in ACE?
Regards,
Thiyagu
10-04-2012 11:10 PM
Hi Thiyagu,
Did you mean client login session to ACE module or client traffic to one of the server in server farm?
Regards
Najaf
10-05-2012 12:04 AM
Hi Najaf,
Thanks for your reply. I want to know about the client traffic to one of the server in teh server farm?
Regards,
Thiyagu
10-05-2012 10:12 AM
Hi,
Try this..Note sure if this will give the exact information which you are look for :-(
ACE_module5/Admin# show serverfarm SFARM1 detail
serverfarm : SFARM1, type: HOST
total rservers : 3
active rservers: 3
description : -
state : ACTIVE <------- Current state of the server farm
predictor : ROUNDROBIN <------- Load-balancing method
weight : -
autoadjust : MAXLOAD
failaction : -
back-inservice : 40
partial-threshold : 40
num times failover : 0
num times back inservice : 0
total conn-dropcount : 0 <------- Total number of connection attempts to this server farm that the ACE discarded
---------------------------------
----------connections-----------
real weight state current total failures
---+---------------------+------+------------+----------+----------+---------
rserver: SERVER1
192.168.252.245:0 10 INSERVICE 0 0 0 <------- Real server IP address, state, and connection statistics
max-conns : 4000000 , out-of-rotation count : 0
min-conns : 4000000
conn-rate-limit : - , out-of-rotation count : -
bandwidth-rate-limit : - , out-of-rotation count : -
retcode out-of-rotation count : -
load value : 0
rserver: SERVER2
192.168.252.246:0 20 INSERVICE 0 0 0
max-conns : 4000000 , out-of-rotation count : 0
min-conns : 4000000
conn-rate-limit : - , out-of-rotation count : -
bandwidth-rate-limit : - , out-of-rotation count : -
retcode out-of-rotation count : -
load value : 0
rserver: SERVER3
192.168.252.247:0 30 INSERVICE 0 0 0
max-conns : 4000000 , out-of-rotation count : 0
min-conns : 4000000
conn-rate-limit : - , out-of-rotation count : -
bandwidth-rate-limit : - , out-of-rotation count : -
retcode out-of-rotation count : -
load value : 0
Regards
Najaf
CCIE (R&S) 25070
10-05-2012 02:02 PM
Hello Thiyagu,
Perhaps you can try below which can give you the idle time and
elapsed time:
# show conn address
# show conn address
# show conn rserver
# show conn rserver
Or what exactly are you looking for?
Jorge
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide