I am configuring two 48pt 9300 switches in a 1+1 mode. I have switch 1 with a priority 15 and role of active and I configured switch 2 with a priority of 14 role standby. When I reload the stack I see this:
Switch#sh switch stack-mode
Switch# Role Mac Address Version Mode Configured State
--------------------------------------------------------------------------------------------------------------------
*1 Active 0cd0.f842.3c00 V02 1+1 Active Ready
2 Member 0000.0000.0000 1+1 None Provisioned
Based upon the Cisco documentation for configuring 1:1 redundancy for the Cisco 9300 switches,
Configure 1+1 Redundancy
I should expect to see this:
Device# show switch stack-mode
Switch Role Mac Address Version Mode Configured State
---------------------------------------------------------------
1 Member 3c5e.c357.c880 1+1' Active' Ready
*2 Active 547c.69de.cd00 V05 1+1' Standby' Ready
3 Member 547c.6965.cf80 V05 1+1' Member' Ready
What am I missing to configure switch 2 as a standby?