first here's my present config on one of my CSS11503:
!************************** CIRCUIT **************************
circuit VLAN33
ip address 19.10.28.211 255.255.255.0
ip virtual-router 2 priority 110 preempt
ip redundant-vip 2 19.10.28.210
ip critical-service 2 UpstreamRouter
circuit VLAN200
ip address 10.15.15.251 255.255.255.0
ip virtual-router 1 priority 110 preempt
ip redundant-interface 1 10.15.15.1
ip critical-service 1 UpstreamRouter
!************************** SERVICE **************************
service BrowServ-1
ip address 10.15.15.21
redundant-index 1
protocol tcp
port 80
active
service BrowServ-2
ip address 10.15.15.22
redundant-index 2
protocol tcp
port 80
active
service UpstreamRouter
ip address 19.10.28.1
active
!*************************** OWNER ***************************
owner BrowServ_Owner
content BrowServ_Rule
add service BrowServ-1
add service BrowServ-2
vip address 19.10.28.210
redundant-index 1
active
!*************************** GROUP ***************************
group BrowServ_Group
vip address 19.10.28.210
add service BrowServ-1
add service BrowServ-2
redundant-index 1
active
here are my questions:
1) how do I configure an additional vip address? e.g. I'd like to configure a vip - 19.10.28.215 to load-balance http traffic to 10.15.15.25 and 10.15.15.26?
2) I presently have a static route in my core router "ip route 10.15.15.0 255.255.255.0 19.10.28.210". (this enables the load-balanced servers to connect to Oracle servers on the Core network). do I need to configure a new route on my core router when I add the additional vip 19.10.28.215?
relevant references and/or examples will be much appreciated.
dayo
