CSM Auto Sync Issue

[Sung Min Cho]

Today we are having two CSMs in failover mode and running as follows.

Sup2 IOS : 12.2(18)SXF17a

CSM  OS : 4.2(14)

If we put the command (hw-module csm # config-sync) on msfc of active CSM  to sync the configuraion between active/standby CSM, standby CSM configuration on MSFC is removed.

We already checked the bug report but we couldn't find related the bug.

Any help would be appreciated.

Thanks,

Sungmin

[Sung Min Cho]

We found the fixed IOS version about this issue through the test.

After downgrading to the 12.2(18)SXF16 versoin, auto-sync operation works well.

Thanks,

Sungmin