CSM-S, how to monitor by snmp.

[andrea.meconi]

I'm using a CSM-S module on my 6513 chassis. How can I monitor it with NNM via snmp?

Thanks.

Andrea.

[skumar1969]

Hi,

See the following. They all can be entered into the global mode.

snmp trap-type enterprise

snmp auth-traps

snmp trap-type generic

snmp trap-type enterprise dos-illegal-attack trap-threshold 1000

snmp trap-type enterprise dos-land-attack trap-threshold 1000

snmp trap-type enterprise dos-smurf-attack trap-threshold 1000

snmp trap-type enterprise chmgr-module-transition

snmp trap-type enterprise chmgr-ps-transition

snmp trap-type enterprise isc-lifetick-failure

snmp trap-type enterprise login-failure

snmp trap-type enterprise reload

snmp trap-type enterprise redundancy-transition

snmp community #@$@# read-only

snmp community #@$@# read-write

snmp trap-host XX.XX.XX.XX #$#$%#%

snmp contact "ABC Company"

snmp name "CSS-$#%$#%"

snmp trap-type enterprise service-transition

snmp location "Sydney L32 MK22"

snmp trap-source specified XX.XX.XX.XX

snmp trap-type enterprise dos-syn-attack trap-threshold 500

thanks

[andrea.meconi]

Many thanks for your help but I think that these are CSS commands.

I'm using a CSM-S WS-X6066-SLB-S-K9 into a IOS C6513 with software 2.1(4).

Thanks.

Andrea.

[skumar1969]

Oops...Sorry I missed that.

thanks