CSM-S time/date
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-17-2006 02:54 AM
I noticed that the CSM module uses different time/date settings than the router.
Is there a way to synchronize the CSM's clock to the router.
Thanks,
Attila
dplexdmz-6509-1#sh clock
11:29:17.246 CET Fri Feb 17 2006
dplexdmz-6509-1#sh mod csm 1 probe real
real = 192.168.7.48:80, probe = APOLLOTEST, type = script,
vserver = TEST, sfarm = TEST
status = OPERABLE, current = 11:06:26 CET 01/17/70,
successes = 3714, last success = 11:06:31 CET 01/17/70,
failures = 211, last failure = 00:51:33 CET 01/17/70,
state = Server is healthy.
script APOLLO
last exit code = 5000
last error: 65534
error info: couldn't open socket: connection refused
while executing
"s
- Labels:
-
Application Networking
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-18-2006 01:59 PM
I have enabled ntp on the cat6k using a server as the source and the CSM has synchronised to the system clock. This is also true for the SSL daughtercard on a CSM-S.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-19-2006 01:05 AM
The router and the SSL daughtercard is already configured to use NTP (I forgot to mention). If CSM logs to the system log uses the correct time. The anomaly is visible only with some commands (sh mod csm 1 tech all, sh mod csm 1 probe real etc.)
Regards,
Attila
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-19-2006 12:40 PM
do you have the command "clock calendar-valid".
This is required for the CSM to synch with the MSFC.
Gilles.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-20-2006 01:33 AM
Thanks. I added "clock calendar-valid" to the configuration but the problem still exist. Do I need to reset the CSM?
Attila