CSS 11500 ssl-accel-backend %BAD IP ADDRESS - CONFIG

philoconnor · ‎05-13-2003

As a followup to my last message, the config I'm using is as follows:

ssl-proxy-list clear_ssl_list

backend-server 1

backend-server 1 server-ip x.x.x.x

backend-server 1 cipher rsa-with-rc4-128-md5

backend-server 1 ip address x.x.x.x

active

service CL_SSL

add ssl-proxy-list clear_ssl_list

keepalive type none

slot 4

type ssl-accel-backend

owner clear_SSL

content cl_ssl_cont_1

protocol tcp

port 80

vip address x.x.x.x

add service CL_SSL

active

Any clues as to why I cannot activate the service "CL_SSL"???

Cheers

Phil

didyap · ‎05-19-2003

I am also facing a similar problem. I have tried entering a dummy IP address and 'no ip address' under the CL_SLL service but it has been of no use. If some one has resolved the issue, please let us know how to proceed.

philoconnor · ‎05-20-2003

I have also tried a dummy 'no ip address', and 'ip address 1.1.1.1'.

I have a call pending with Cisco TAC. I will post any useful answers.