CSS/ACE response time for HTTP 200 ok

[CSCO10154079]

Hi,

Is there any show command available for CSS/ACE to display eg. HTTP 200 response time per client request.

Our SLA is to serve HTTP200 within 1 sec after the 1st request is send to web server from the CSS/ACE

My search on this forum suggest sniffer. Any other alternative.

Kelvin

[Gilles Dufour]

Are you trying to make sure the ACE/CSS does not delay the response ?

Or do you want the ACE/CSS to detect if the server is too slow to respond ?

On the ACE you can set a probe max response time to 1sec and if the response does not come within this time, the probe goes down.

The command on ACE, under the probe config is :

receive Configure max time to wait inorder to receive reply from server

Otherwise, the sniffer trace if you just want to have a look and make sure about the time.

Gilles.