cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1269
Views
0
Helpful
1
Replies

Disk Ready, Not Online

james.robinson
Level 1
Level 1

What can I do to bring this disk online?

259735-0090-ATTWAAS1#sh disk detail

RAID Physical disk information:
  disk00: Online                     BJ505FJC    286102 MB
  disk02: Online                     BJ505F86    286102 MB
  disk04: Ready                      JHWZKP3C    286102 MB

===============================================

From show disk tech-support>

Device #2

         Device is a Hard drive

         State                         : Ready

         Supported                     : Yes

         Transfer Speed                : SAS 3.0 Gb/s

         Reported Channel,Device       : 0,4

         Vendor                        : IBM-ESXS

         Model                         : VPBA300C3ETS11 N

         Firmware                      : A496

         Serial number                 : JHWZKP3C

         World-wide name               : 5000CCA00D6FF40B

         Size                          : 286102 MB

         Write Cache                   : Disabled (write-through)

         FRU                           : 43X0817

         PFA                           : No Device #2
         Device is a Hard drive
         State                         : Ready
         Supported                     : Yes
         Transfer Speed                : SAS 3.0 Gb/s
         Reported Channel,Device       : 0,4
         Vendor                        : IBM-ESXS
         Model                         : VPBA300C3ETS11 N
         Firmware                      : A496
         Serial number                 : JHWZKP3C
         World-wide name               : 5000CCA00D6FF40B
         Size                          : 286102 MB
         Write Cache                   : Disabled (write-through)
         FRU                           : 43X0817
         PFA                           : No

1 Reply 1

finn.poulsen
Level 3
Level 3

Hi James,

From the disk display, it appears that this is a WAE-674 with 3 disks.

I think the disk should be in disk00, disk01 and disk02 - but you have placed the (new) disk in disk04.

I havn't found anywhere that this is supported.

best regards

Finn Poulsen

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: